AMT Electronic ME-1 M- Drive
AMT Elektronik ME-1 M-Drive
Karakteristik umum
Drive Efek Series dirancang untuk dihubungkan ke "bersih" masukan saluran combo gitar dan amplifier dan dimaksudkan untuk mendapatkan efek overdrive sound.The gitar seri memungkinkan pemain untuk mendapatkan hangat, suara alam dalam berbagai ampli tabung legendaris melestarikan individualitas instrumen Anda.
Di Seri Hard kami menggunakan solusi sirkuit baru asli dikembangkan oleh spesialis AMT berdasarkan persaingan tahap tabung yang memungkinkan Anda untuk mendapatkan suara cerah dan kaya dalam gaya alat penambah kecepatan tabung asli saat menggunakan tegangan rendah (9V) daya dan konsumsi arus listrik tidak signifikan (kurang dari 4mA).
Bila menggunakan Efek Hard Series Anda harus menyadari fakta bahwa suara yang dihasilkan terutama dipengaruhi oleh combo atau penguat Anda gunakan serta instrumen Anda bermain.
Fitur Seri bypass pasif, yang, di satu sisi, adalah kabel berkualitas tergantung, di sisi lain - mempertahankan suara asli instrumen ketika efek tidak aktif.
Kontrol
Drive Efek Seri mudah untuk menangani dan memerlukan penyesuaian minimum.
Sensitivitas pedal ditentukan oleh posisi kontrol GAIN dan tergantung pada model memberikan sensitivitas secara keseluruhan sesuai dengan sensitivitas overdrive ditiru.
Tingkat output ditentukan oleh posisi kontrol LEVEL, 13 jam yang menyediakan penyesuaian tingkat standar-10dB. Tingkat output pada posisi maksimum mencapai +8 dB, jadi gunakan posisi ini hanya jika Anda ingin overdrive rangkaian input combo atau amplifier.
Pedal ini juga dilengkapi kontrol NADA, yang dirancang untuk nada umum yang sesuai dari overdrive pedal dengan saluran bersih atau krisis combo Anda (amp). Dalam hal ini, dianjurkan untuk menyesuaikan kontrol nada dasar langsung di combo.
Untuk meningkatkan nada yang sesuai dengan amplifier dan combo yang memiliki karakter suara yang berbeda secara keseluruhan, kami menyediakan penyesuaian tambahan dari suara.
Individu Efek Fitur
Drive Efek Seri diwakili oleh beberapa pedal yang masing-masing berfokus pada mendapatkan jenis overdrive tertentu.
Yang populer di tahun 1980-an * overdrive Marshall mid-gain JCM800 telah menjadi klasik karena kemampuannya untuk menghasilkan berbagai keuntungan yang luas. M-drive efek membentuk struktur karakteristik suara overdrive dari JCM800 mempertahankan ringan pada keuntungan kecil dan meningkatkan kepadatan suara pada nilai keuntungan maksimum.
Harga Effect Gitar AMT Electronic ME-1 M- Drive Rp 1.600.000
AMT Electronic ME-1 M- Drive
General characteristics
Drive Series Effects are designed to be connected to "clean" channel inputs of guitar combos and amplifiers and are intended for getting overdriven guitar sound.The effects of the series allow performers to obtain warm, natural sound within a wide range of legendary tube amps preserving individuality of your instrument.
In the Drive Series we used new original circuitry solutions developed by AMT specialists based on tube stages emulation which allow you to get bright and rich sounds in the style of original tube overdrives while using low voltage (9V) power and insignificant electric current consumption (less than 4mA).
When using Drive Series Effects you should be aware of the fact that the resulting sound is mainly affected by the combo or amplifier you use as well as the instrument you play.
The series feature the passive bypass, which, on the one hand, is cable-quality dependent, on the other - retains the original sound of the instrument when the effect is off.
Controls
Drive Series Effects are easy to handle and require minimum adjustments.
The pedal sensitivity is determined by the position of GAIN control and depending on the model provides overall sensitivity corresponding to the sensitivity of emulated overdrive.
The output level is determined by the position of LEVEL control; its 13 hours adjustment provides the standard level of -10dB. The output level at its maximum position reaches +8 dB, so use this position only if you want to overdrive the input circuit of your combo or amplifier.
The pedal also features TONE control, which is designed for general tone matching of the pedal overdrive with clean or crunch channel of your combo (amp). In this case, it is recommended to adjust basic tone control directly in the combo.
To enhance the tone matching with amplifiers and combos that have different overall sound character, we provided incremental adjustment of Voice.
Individual Effects Features
Drive Series Effects is represented by several pedals each of which focuses on obtaining a particular overdrive type.
The popular in the 1980s Marshall* JCM800's mid-gain overdrive has become a classic due to its ability to produce a wide gain range. M-drive effect shapes the structure of the overdriven sound characteristic of JCM800 retaining the lightness at small gain and increasing the sound density at maximum gain values.
General characteristics
Drive Series Effects are designed to be connected to "clean" channel inputs of guitar combos and amplifiers and are intended for getting overdriven guitar sound.The effects of the series allow performers to obtain warm, natural sound within a wide range of legendary tube amps preserving individuality of your instrument.
In the Drive Series we used new original circuitry solutions developed by AMT specialists based on tube stages emulation which allow you to get bright and rich sounds in the style of original tube overdrives while using low voltage (9V) power and insignificant electric current consumption (less than 4mA).
When using Drive Series Effects you should be aware of the fact that the resulting sound is mainly affected by the combo or amplifier you use as well as the instrument you play.
The series feature the passive bypass, which, on the one hand, is cable-quality dependent, on the other - retains the original sound of the instrument when the effect is off.
Controls
Drive Series Effects are easy to handle and require minimum adjustments.
The pedal sensitivity is determined by the position of GAIN control and depending on the model provides overall sensitivity corresponding to the sensitivity of emulated overdrive.
The output level is determined by the position of LEVEL control; its 13 hours adjustment provides the standard level of -10dB. The output level at its maximum position reaches +8 dB, so use this position only if you want to overdrive the input circuit of your combo or amplifier.
The pedal also features TONE control, which is designed for general tone matching of the pedal overdrive with clean or crunch channel of your combo (amp). In this case, it is recommended to adjust basic tone control directly in the combo.
To enhance the tone matching with amplifiers and combos that have different overall sound character, we provided incremental adjustment of Voice.
Individual Effects Features
Drive Series Effects is represented by several pedals each of which focuses on obtaining a particular overdrive type.
The popular in the 1980s Marshall* JCM800's mid-gain overdrive has become a classic due to its ability to produce a wide gain range. M-drive effect shapes the structure of the overdriven sound characteristic of JCM800 retaining the lightness at small gain and increasing the sound density at maximum gain values.
Subscribe to:
Post Comments
(
Atom
)
.jpg)
No comments :
Post a Comment