HBE Mimic 2 Analog Delay
Para Electronics Homebrew Mimic 2 Penundaan Analog.
The HBE Mimic adalah penundaan semua analog. Ini fitur NOS Brigade Panasonic Bucket, sampai dengan 400ms waktu penundaan dan switching memotong yang benar! Anda dapat mengatur waktu tunda untuk sampai 400ms dengan menyesuaikan pot trim di papan sirkuit.
Harga effect gitar HBE Mimic 2 Analog Delay Rp 2.845.000
The Homebrew Electronics Mimic 2 Analog Delay.
The HBE Mimic is an all analog delay. It features NOS Panasonic Bucket Brigades, up to 400ms of delay time and true bypass switching! You can adjust the delay time to up to 400ms by adjusting the trim pot on the circuit board.
Controls:
- Input-Instrument in. Unplug when not in use to conserve battery life.
- Out-Out to amp.
- 9VDC jack-For use with -(Negative) center, 9VDC, filtered and regulated, CE or UL approved power supply.
- Time control-Adjusts the amount of delay time from 10ms up to 400ms depending on where the internal trim pot is set.*
- Level control-Adjusts the level of delay signal. The delay is reduced to zero in the fully counterclockwise position and matches the volume of the dry signal in the fully clockwise position.
- Repeat control-Controls the number of repeats from only one at the minimum setting to infinite repeats in the fully clockwise position. Higher repeat settings may result in self-oscillation (really cool space ship sounds).
- On/Off-True bypass of effect. (Note: a small pop may occur when effect is switched on/off. This is normal and is a trait associated with true bypass).
*Internal Trim Pot-(Located on the lower left hand side of the ciruit board.) Adjusts the maximum amount of available delay time. Note: Higher delay time settings may degrade the quality of the delay signal and introduce "clock noise" into the pedal. " Clock noise" is a high pitched tone commonly associated with analog delays.
The HBE Mimic is an all analog delay. It features NOS Panasonic Bucket Brigades, up to 400ms of delay time and true bypass switching! You can adjust the delay time to up to 400ms by adjusting the trim pot on the circuit board.
Controls:
- Input-Instrument in. Unplug when not in use to conserve battery life.
- Out-Out to amp.
- 9VDC jack-For use with -(Negative) center, 9VDC, filtered and regulated, CE or UL approved power supply.
- Time control-Adjusts the amount of delay time from 10ms up to 400ms depending on where the internal trim pot is set.*
- Level control-Adjusts the level of delay signal. The delay is reduced to zero in the fully counterclockwise position and matches the volume of the dry signal in the fully clockwise position.
- Repeat control-Controls the number of repeats from only one at the minimum setting to infinite repeats in the fully clockwise position. Higher repeat settings may result in self-oscillation (really cool space ship sounds).
- On/Off-True bypass of effect. (Note: a small pop may occur when effect is switched on/off. This is normal and is a trait associated with true bypass).
*Internal Trim Pot-(Located on the lower left hand side of the ciruit board.) Adjusts the maximum amount of available delay time. Note: Higher delay time settings may degrade the quality of the delay signal and introduce "clock noise" into the pedal. " Clock noise" is a high pitched tone commonly associated with analog delays.
Subscribe to:
Post Comments
(
Atom
)
.jpg)
No comments :
Post a Comment